Application - surface mounted or suspended lighting fixtures Assembly - using surface springs - using suspension accessories - using mounting adhesive Additional information - possibility of making a linear fixture with IP64 protection, which means the fixture is dustproof and splashproof - achieving IP64 is possible with the following covers: LIGER-22, MUN-22 and HS-22 - ability to construct polygonal fixtures using ZM connectors Profile bending Minimum internal radius 3000mm Minimum external radius 3000mm - minimum radius - bending radius which when exceeded causes destruction (deformation, bending or lack of compatibility with other accessories, e.g. covers, end caps, etc.) of the profile - internal radius - refers to the profile bent so that the cover is facing the inside of the arch - external radius - refers to the profile bent so that the cover is facing the outside of the arch - irregular curves are possible after consultation and individual quotation - when bending anodized profiles, one should be aware of cracking of the anode coating (which may be more or less visible depending on the radius) |
---|
IP Rating |
|
Control Gear |
|
Finishes |
Supplier of high-end lighting solutions to the Australian and New Zealand architecture and design community.
Share the lightbox using the following public link. Any changes you make to this lightbox will automatically be reflected this shared link.